background image

14

Cobalt International, Inc will warrant this product to be free of

manufacturer defects for a period of ninety (90) days.  Co-

balt will repair or replace, at its option, any C-VUE aquarium 

stand or component which is deemed defective in workman-

ship or materials. All warranty claims MUST be submitted 

with a valid proof of purchase. This warranty does not cover 

damage resulting from modifications, misuse, negligence, 

improper handling and installation, or incidental and/or con-

sequential damages resulting from the use of this product. 

Any modification, including but not limited to cutting, drilling, 

or changing out of parts to non-stock components, etc will 

render this warranty void. Incidental and/or consequential 

damages may include (but are not limited to): 

If the stand is not placed on a flat level surface, designed 

to support the combined weight of the stand and aquarium 

when filled. If an aquarium larger than that for which the 

stand was designed is placed on the stand. If the stand is 

moved without first removing the aquarium,  If the stand is 

modified in any way from its original condition. If the stand 

shows any damage due to water, impact, negligence, or 

mishandling. If the stand is used for other than its intended 

purpose.
Cobalt International is not responsible for and warranty does 

not cover livestock loss (including but not limited to, fish, 

plants, corals, live rock, other invertebrates, or aquarium 

décor), personal injury, property loss, or damage (direct, 

incidental, or consequential) resulting from the use of this 

product.  Use of this product indicates acknowledgement and 

acceptance of these terms. This warranty gives you specific 

legal rights. You may also have other legal rights that vary 

from state to state*.

*Because some states do not allow the exclusion of incidental or consequential damages, 

this exclusion may not apply to you.

Questions or Missing Parts:

Call 803-591-9500 or email info1@cobaltinternational.com

WARRANTY

Summary of Contents for C-VUE 18

















Reviews: