9921-FS-OM (V1.18)
9921-FS PRODUCT MANUAL
2-9
Installation and Setup
Installing a Rear Module
RM20-9921-E Base Rear Module
Provides the following connections:
• Four 3G/HD/SD-SDI video input BNCs (
SDI IN A
thru SDI IN D
)
• Eight AES I/O BNC (AES-3id) input/outputs
(
AES I/O 1
thru
AES I/O 8
; I/O function of each
connection is software-configurable)
• Two opto-isolated GPI inputs (terminals GPI 1-G
and GPI 2-G)
• Two SPST NO GPO relay closure contacts
(floating) (terminals GPO 1/1 and 2/2)
• Two RS485 serial ports; GUI configurable for
function (COMM1 and COMM2)
• Four 3G/HD/SD-SDI video output BNCs
(
SDI OUT A thru SDI OUT D
)
Note: AES inputs and outputs operational only with card
option +AES installed.
RM20-9921-F Base Rear Module
Provides the following connections:
• 3G/HD/SD-SDI video input BNC (
SDI IN A
)
• Eight AES I/O BNC (AES-3id) input/outputs
(
AES 1
thru
AES 8
; I/O function of each connection
is software-configurable)
• 3G/HD/SD-SDI video output BNC
(
SDI OUT A
)
Note: AES inputs and outputs operational only with card
option +AES installed.
Table 2-1
9921-FS Rear Modules — continued
9921-FS Rear Module
Description