3
Control and Display Descriptions
3-2
9921-FS PRODUCT MANUAL
9921-FS-OM (V1.18)
After familiarizing yourself with the arrangement described in Function
Menu/Parameter Menu Overview, proceed to the subsection for the particular
user interface being used. Descriptions and general instructions for using each
user interface are individually described in the following subsections:
•
DashBoard™ User Interface (p. 3-4)
•
Cobalt
®
Remote Control Panel User Interfaces (p. 3-5)
Note:
When a setting is changed, settings displayed on DashBoard™ (or A Remote
Control Panel) are the settings as effected by the 9921-FS card itself and
reported back to the remote control; the value displayed at any time is the
actual value as set on the card.
Function Menu/Parameter Menu Overview
The functions and related parameters available on the 9921-FS card are
organized into function menus, which consist of parameter groups as shown
below.
Figure 3-1 shows how the 9921-FS card and its menus are organized, and also
provides an overview of how navigation is performed between cards, function
menus, and parameters.
Figure 3-1 Function Menu/Parameter Menu Overview
9921-
Menu a
Menu b
Menu z
• • •
Individual Parameters
Each menu consists of groups of parameters related to
the function menu. Using the “Video Proc” function
menu example, the individual parameters for this
function consist of various video processor
parameters such as Luma Gain, Saturation, and so on.
If using DashBoard™ or a Remote Control Panel, the
desired 9921-FS card is first selected.
The desired function menu is next selected.
Function Menus consist of parameter groups
related to a particular 9921-FS card function
(for example, “Video Proc”).
