Copyright
©Copyright 2021, Cobalt Digital Inc. All Rights Reserved.
Duplication or distribution of this manual and any information contained within is strictly prohibited without the express written
permission of Cobalt Digital Inc. This manual and any information contained within, may not be reproduced, distributed, or
transmitted in any form, or by any means, for any purpose, without the express written permission of Cobalt Digital Inc.
Reproduction or reverse engineering of software used in this device is prohibited.
Disclaimer
The information in this document has been carefully examined and is believed to be entirely reliable. However, no responsibility
is assumed for inaccuracies. Furthermore, Cobalt Digital Inc. reserves the right to make changes to any products herein to improve
readability, function, or design. Cobalt Digital Inc. does not assume any liability arising out of the application or use of any
product or circuit described herein.
Trademark Information
Cobalt
®
is a registered trademark of Cobalt Digital Inc.
Compass
®
is a registered trademark of Cobalt Digital Inc.
openGear
®
is a registered trademark of Ross Video Limited. DashBoard™ is a trademark of Ross Video Limited.
Congratulations on choosing the Cobalt
®
9910DA-AV Analog Video Distribution Amplifier. The 9910DA-AV
is part of a full line of modular processing and conversion gear for broadcast TV environments. The Cobalt
Digital Inc. line includes video decoders and encoders, audio embedders and de-embedders, distribution
amplifiers, format converters, remote control systems and much more. Should you have questions pertaining to
the installation or operation of your card, please contact us at the contact information on the front cover.
Manual No.:
9910DA-AV-OM
Document Version:
V1.4
Release Date:
July 14, 2021
Applicable for
Firmware Version
(or greater):
1.2.6
Description of
product/manual
changes:
- Update for revision where card is now shipped with
Loop/Term jumper set in the Loop position rather
than Term.
9910DA-AV-OM (V1.4)
