Cobalt_OM_preprint_shell.fm Page 2 Wednesday, March 1, 2006 5:39 AM
3
-
22
R30 Owner’s Manual
COBALT
R30
BOWRIDER
S
ECTION
3
HELM AND INSTRUMENTATION
The boat must be indicating 10 MPH on the
speedometer or greater to display proper heading.
Your Cobalt boat helm will monitor and provide
operation of the boat’s functions. The gauges are
illuminated for night operation.
On occasion, a small fluctuation in a gauge reading
is not unusual. If an instrument reading is outside
the normal or recommended ranges, determine the
cause or see your authorized Cobalt dealer.
Refer to the engine operator’s manual for normal
recommended ranges.
1. BILGE BLOWER -
The blower should be run for
at least 4 minutes before starting the engine. The
purpose of the blower is to remove explosive fumes
and circulate fresh air into the engine compartment.
Press this switch to manually turn the bilge blower
on or off.
2. BILGE PUMP FWD -
Switch manually controls
the forward bilge pump.
3. BILGE PUMP AFT -
Switch manually controls
the aft bilge pump.
4. GARMIN GMI20 DISPLAY ONLY
5. COCKPIT LIGHTS
6. OVERHEAD LIGHTS
7. ACCESSORY SWITCH
8. GARMIN 7" CHART PLOTTER
9. GARMIN GMI20
COB_0444_A
1 2 3 4
5
6 7
8
9
10 11 12 13
14
15
16
17
18
19
20
21
23
24
25
22
A
WARNING
Avoid the risk of injury, death or
equipment damage. If the safety of you
or others depends on running the
engine during an abnormal condition,
make the right decision on saving
equipment or lives. Do not jeopardize
the safety of you or others to protect
your boat.