17
to UDP mode.
Send SMS Command:"
UDP+p0
" switch off UDP mode.
6.20
GPRS Setting
User must send SMS via cell phone to set up APN, IP and port before starting
tracking by GPRS on tracking system.
6.20.1 Setting up APN
6.20.1.1APN standards for Access Point Name and differs from country to
country. For more information about your local APN, please inquire with your
local GPRS network operator.
6.20.1.2 Send SMS “
APN+Space+your local APN+APN name+APN
password
” via a cell phone and if succeeded, the tracker will return the
message “APN OK”.
6.20.1.3 E.g. Send SMS command “APN123456 CMNET”. If succeeded, it will
reply SMS “APN OK”
Notes: CMNET is the APN of one of china GPRS Network Operator (China
mobile), it has no APN name and Password.
6.20.2 IP and Port Setup
Send SMS: “
pspace+IP space+port number
”, If
succeeded, it will reply “ADMINIP,CONFIG OK”. E.g. Send SMS:
“adminip123456 58.64.200.27 8169” to the tracker device, (58.64.200.27 is IP,
8169 is port).