Page 3 of 5
www.cobhamsatcom.com
Field replacement procedure –
Doc. No.: 97-178838-A
7.
Disconnect the X-pol cable.
8.
Remove the cable tie.
9.
Remove the co-pol cable from the RF pack.
10.
Take off the RF Package by turning it anti-
clockwise and lift it off.
11.
Leave the 4 loosely mounted screws at the back
of the antenna dish.
12.
Take the new RF Pack and put it over the
screws, then turn it clockwise.
Important!
Turn the RF Package as far as
possible clockwise, and keep it there until the
screws are tightened.
13.
Tighten the 4 screws to 4.5 Nm
