Chapter 2: Operation
Scan
15
22222
Operation
Scan
The radio has a scanning function for tagged voice channels. Any available
voice channel, including weather and private channels, can be tagged and
added to the scanning sequence. As default the radio scans with priority
scanning of channel 16. If a signal is received while in any scanning mode,
only channel 16 continues to be watched.
If there is a signal in one of the scanned channels, the display shows the
channel in which the signal is received. If PTT is pressed while scanning, the
scanning stops, the radio is tuned into the displayed channel and
transmission starts immediately on the displayed working channel.
To start scanning
press the soft key
SCAN
. The SCAN menu is shown. Press
START
to start scanning. To leave the SCAN
menu, but not the scanning procedure, press
EXIT
.
To stop scanning
press
STOP
,
QUIT
if not
in the SCAN menu, or press
PTT
on the
speaking device.
To tag a channel for scanning
turn the
selector knob until the wanted channel is in
the display. Then press the soft key
TAG
.
The display shows the channel number and
the word
TAG
at the right side of the display.
To remove a channel from the
scanning sequence
turn the selector knob until the tagged channel is
displayed. Then press the soft key
TAG
to remove the tag.
To see only tagged channels press the soft key
FILTER
and turn the
selector knob. Press the soft key
FILTER
to leave the FILTER function. For
details how to set up the scanning function see
Radio setup
on page 19.
Note
The displayed working channel is temporarily included in the
scanning list (although no TAG icon is shown).
EXIT
START
TAG
FILTER
INT
INTERSHIP/PORT
EXIT
STOP
TAG
FILTER
INT
SCANNING[16]
Summary of Contents for SAILOR 6249 VHF
