background image

 

 

 

| 2021-08 User manual 

Eclipse Tilt Wheelchair

 

  

15 

 

 

 

 

 

Eclipse Tilt 

Wheelchair’s seat, frame, backrest 

upholstery and push handles can be cleaned with 
water and an ordinary detergent. 

 Wet or damp

 backrest upholstery will reduce 

the flame retardant effect

Disinfection

 

Seat, frame, backrest upholstery and push 
handles can be disinfected with ethanol 70-85% 
or a chlorine product 1000-1200 ppm.

 

The wheelchair cushion can be changed when 
transferred to a new user. 

 Disinfect Eclipse Tilt Wheelchair when passed 

on to a new user. This is done to avoid cross-
contamination and infections. 

Local cleaning and disinfection procedures must 
always be followed. 

Maintenance 

1. Check all nuts and bolts are tight before using 
the Eclipse Tilt Wheelchair. Check all parts for 
wear and damage and replace parts where 
required.  

2. Keep axles free from dirt and fluff to ensure the 
mechanism locks correctly and the wheels can 
turn freely. 

3. Lubricate the axles at least once a month (use a 
3-in-1 oil or a similar product). 

4. Periodically check the wheels and tyres for 
cracks and wear and replace as required. 

5. Periodically check the hand rims are securely 
attached to the wheel. 

 

 

When Eclipse Tilt Wheelchair is not in use store it 
dry and in temperatures between -10° 

 50°C. 

Eclipse Tilt Wheelchair is (without user) suitable 
for land- and air freight. Eclipse Tilt Wheelchair is 
not foldable. To avoid injuries on the staff, it is not 
recommended to carry the 40 kg heavy 
wheelchair. The wheelchair can be lifted in the 
frame if it must be transported without user in a 
vehicle. 

Eclipse Tilt Wheelchair is crash tested. Therefor it 
can be used as a seat in a vehicle. The wheelchair 
must be fastened in the vehicle by a Transit Tie 
Down System (accessory). There are four 
brackets included and marked with the Transit 
Tie-Down symbol. The wheelchair seat must be 
lowered to the max to avoid the risk of injury. 

 

 

 

9. Transport and storage 

The Transit Tie-Down system must only be used 

with approved safety systems which comply with 

EU 214/2014. 

 

 

Eclipse Tilt Wheelchair should be stored in the 
dark and covered with a blanket or similar. 

Eclipse Wheelchair should be stored between 
-10° - 50°C in terms of temperature. 

Check regularly that the wheelchair has not 
become wet or has suffered other damage during 
storage. 

9.1 Long-term storage 
 

8. Cleaning and maintenance 

Summary of Contents for Eclips Tilt





















Reviews: