background image

M o d e l   Y e a r   2 0 1 4                                                                                                                                                                                                                            15

M a v e r i c k   B o a t   C o m p a n y ,   I n c .     •   3 2 0 7   I n d u s t r i a l   2 9 t h   S t .   •   F o r t   P i e r c e ,  

F l o r i d a   3 4 9 4 6   •   ( 7 7 2 ) - 4 6 5 - 0 6 3 1   o r   ( 8 8 8 ) - s h a l l o w   •   F a x :   ( 7 7 2 )   4 8 9 - 2 1 6 8

ANCHOR LOCKER/PHENOLIC PLATES

Anchor Locker/Rode Storage

The anchor locker is located at the bow of the boat and is accessible through the anchor locker door or hatch (photo 
below). There is an eye mounted to the bow eye to secure your anchor rode or chain to. After setting your anchor, the 
excess rode can remain stored in the locker. The notch supplied in the door allows you to securely close the locker by 

aligning your rode through the notch.

 

Phenolic Plate Location

Your Cobia 237 comes standard with phenolic plates laminated into the cockpit floor. These plates secure the leaning 
post and optional T-top and are designed for exceptional screw retention capabilities and provide the support required to 
secure such weight bearing items. 

** NOTE THE LOCATIONS OF THE PLATES ARE APPROXIMATE. IF YOU WANT TO SECURE A WEIGHT BEARING 
ITEM TO A PLATE PLEASE GO TO YOUR NEAREST COBIA DEALER FOR ASSISTANCE 

Rode Storage Notch

Summary of Contents for 237 CC 2014




























Reviews: