M o d e l Y e a r 2 0 1 9 p a g e 3 1
M a v e r i c k B o a t g r o u p , I n c . • 3 2 0 7 I n d u s t r i a l 2 9 t h S t . • F o r t P i e r c e , F l o r i d a 3 4 9 4 6 • ( 7 7 2 ) - 4 6 5 - 0 6 3 1 o r ( 8 8 8 ) - s h a l l o w • F a x : ( 7 7 2 ) 4 8 9 - 2 1 6 8
S E A T I N G
Optional Bow Cushion Set
The 301 CC comes with the option of a six-piece bow cushion set. These cushion bottoms are removable and are held in
place by several sets of stainless steel snaps. To remove the cushions, simply pull the snap strap away from the
embedded snap and remove and store the cushion. When left outside or exposed to the elements for a prolonged period
of time, it is recommended to take off the seat cushions and store them in a dry place like the head area.
301 CC Aft Seating
To deploy the standard aft seat, grab the black handles and pull out and down. Once the seat begins to swing open push on
the topside of the cushion straight down until the seat is fully horizontal and locks in place. To stow the seat repeat the
procedure in reverse by lifting from the base and slightly pulling out at the same time. Once free of the hinge catches the
seat will begin to close. At this point, push the seat up until it’s firmly against the back wall. When the seat is fully closed the
cushion should be flush against the back wall with the seat securely positioned in the intended recess. To remove the
backrest, simply pull up until its arms are clear of the rod holders. The arms are designed to swivel to aid in making the
assembly as small as possible for easy stowage. When putting the backrest back on make sure that its arms are fully seated
in the bottom of the rod holders before use.
Summary of Contents for 301CC
Page 38: ...301 Hull Wiring Harness...
