13
Maverick Boat Group
3207 Industrial 29th St. • Fort Pierce, Florida 34946
(772)-465-0631
•
cobiaboats.com
350 Livewell Pump Assembly
The livewell pump assembly is composed of a scoop
strainer mounted to the bottom of the hull, a thru hull
fitting, ball valve assembly, and the pump. As you can
see, the ball valve assembly is in the “OPEN” position.
This is the correct position for the operation of the
livewell.
Console Access and Console Interior
Inside the console you’ll find the electric head with macerator,
fresh water sink with
spray nozzle for rinsing off, switch panel for flushing head and on-off switch for
macerator. There is a DC breaker panel inside and also two opening port hole windows.
There is also access to the macerator, y-valve, water intake and discharge for the toilet
and holding tank, and another access to the forward bilge.
Console/Head Access
Located at the top on the inside of the console/head
access door is a locking gas shock that aides in opening
the door and keeping the door open once the shock is
fully extended. With the door fully opened, it can only
be closed by releasing the pressure of the metal sleeve
on the door side against the shock that is mounted to
the console. To do this, open the door to its fullest open
position, thereby allowing the door slide sleeve to be
moved so that it will slide overtop of the gas shock as the door closes. Failure to release
this locking mechanism while attempting to close the door will lead to the gas shock
failing, or damage to the mounting brackets.
Livewell Pump Assembly in the “OPEN”
Position
Gas Shock
