33
Maverick Boat Group
3207 Industrial 29th St. • Fort Pierce, Florida 34946
(772)-465-0631
•
cobiaboats.com
of your 350 CC to prevent damage to the bow. The windlass is mounted just aft of the
bow roller plate. The Windlass breaker is located inside the console on the main
distribution panel. The windlass solenoid is mounted just above and to the left of the
breaker panel.
Please review the manufacturer’s opera
ting instructions on the following
pages before using your windlass. Additional information can be found in
the Lewmar owner’s manual.
WARNING: READ ALL INSTRUCTIONS BEFORE OPERATING
WINDLASS
DO NOT USE THE WINDLASS TO DRAG THE BOAT TO YOUR ANCHOR. THE
PROPER METHOD IS TO USE YOUR BOATS OWN POWER TO POSITION
YOURSELF RIGHT ABOVE THE ANCHOR AND THEN USE THE WINDLASS TO
HAUL THE ANCHOR. STAY CLEAR OF THE CHAIN, ROPES, AND GYPSY.
MAKE SURE THE ELECTRICAL MOTOR IS OFF WHEN WINDLASS IS USED
MANUALLY (EVEN WHEN USING THE HANDLE TO DISENGAGE THE
CLUTCH). IN FACT, PEOPLE WITH A REMOTE CONTROL MIGHT
ACCIDENTALLY OPERATE THEIR CONTROL. FASTEN THE CHAIN OR ROPE
WITH THE SAFETY LANYARD BEFORE MOVING TO NAVIGATION. DO NOT
OPERATE THE WINDLASS BY USING THE ELECTRICAL POWER WHEN THE
LEVER IS INSERTED INTO THE DRUM OR IN THE COVER OF THE GYPSY.
