Protection from Fire:
1. Do not place near sources of heat.
2. Do not block any ventilation holes.
3. Check your AC wall socket will take the load you are applying to avoid any overloading.
Protection from Injury and Damage:
1. Never try to modify this unit.
2. Always install the unit in a suitable location where vibrations to the unit are avoided.
3. Check this unit matches the mains voltage and frequency before plugging it in to your mains socket.
4. If any liquids or objects have entered the unit, switch it off immediately and consult a qualified engineer.
5. If the unit malfunctions or there is damage to the mains cable, disconnect immediately and consult a
qualified engineer.
6. All parts should be replaced with genuine spare parts and carried out by a qualified engineer.
Unpacking:
1. The box should contain a CPA-2005 and user manual.
2. If there is any damage or missing parts, please contact your dealer immediately.
Specifications:
Power supply:
AC 230 volts
24 volts DC
Power 4 ohms:
150W RMS
Output options:
4-16 Ohms/100V/70V
5 x 100 volt outputs
Mic. Input:
2-4mV 600 Ohms
Aux. Input:
775mV 15k Ohms
Equalisation:
± 12dB
Dimensions:
485 x 450 x 100mm
Weight:
12.2kg
Features:
The CPA-2005 is a Amplifier suitable for powering conventional 4-16 Ohm or 100 volt line loudspeakers.
Features include:
1. 150 Watt rms output
2. 70/100 volt line or 4-16 Ohm output
3. 5 separate 70/100 volt line outputs
4. 3 Microphone inputs with XLR or Jack input
5. XLR inputs ca be switched to provide pantom power
6. 1 Microphone with talkover
7. 4 Auxillary line inputs
Line/CD/Tuner/Tape
8. Bass and treble controls
9. Chime with level control
10. Switched alarm sounder
11. Record or line output for banking amplifiers
12. 24volt DC power option.
