www.cobratools.com
GENERAL SAFETY
Important
• Replacement parts:
When servicing, use only
identical replacement
parts.
• Polarized plugs: To
reduce risk of electric
shock, this equipment
has a polarized plug (one
blade is wider than the
other). This plug will fit in
a polarized outlet one way.
If the plug does not fit fully
in the outlet, reverse the
plug. If it still does not fit,
contact a qualified
electrician to install the
proper outlet. Do not alter
or modify the plug in any
way.
WORK AREA
• Keep your work area clean and well lit. Cluttered benches and dark areas
invite accidents.
• Do not operate power drum machine in explosive atmospheres, such as in
the presence of flammable liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep bystanders, children, and visitors away while operating this cable
drum machine. Distractions can cause you to lose control.
ELECTRIC SAFETY
• Grounded tools must be plugged into an outlet properly installed and
grounded in accordance with all codes and ordinances. Never modify the tool’s
polarized plug in any way. Do not use any adapter plugs. Check with a qualified
electrician if you are in doubt as to whether the outlet is properly grounded.
Failure to follow this instruction could result in a shock hazard, which could lead
to death or serious personal injury.
• Double insulated tools (like this one) are equipped with a polarized plug
(one blade is wider than the other). This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician to install a polarized outlet. Do
not change the plug in any way. Double insulation eliminates the need for
a three wire grounded power cord and grounded power supply system.
(applicable only to Class II tools).
• Avoid body contact with grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an increased risk of electric shock if
your body is grounded.
• Don’t expose this cable drum machine to rain or wet conditions.
Water entering a power tool will increase the risk of electric shock.
• Do not abuse the cord. Never use the cord to carry the cable drum machine
or pull the plug from an outlet. Keep cord away from heat, oil, sharp edges
or moving parts. Replace damaged cords immediately. Damaged cords
increase the risk of electric shock.
• When operating this cable drum machine outside, use an outdoor extension
cord marked “W-A” or “W.” These cords are rated for outdoor use to reduce
the risk of electric shock.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use common sense when
operating this cable drum machine. Do not use this cable drum machine
while tired or under the influence of drugs, alcohol, or medication.
A moment of inattention while operating power to this cable drum machine
may result in serious personal injury.
• Dress properly. Do not wear loose clothing or jewelry. Contain long hair.
Keep your hair, clothing, and gloves away from moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts.
• Wear snug fitting leather gloves when operating this machine. Do not use
cloth or fabric gloves as these can get caught in the coils of the cable while
the drum is rotating.
• Avoid accidental starting. Be sure switch is off before plugging in. Carrying
this cable drum machine with your finger on the switch or plugging in tools
that have the switch in the “on” position invites accidents.
• Remove adjusting keys or wrenches before turning on this cable drum
machine. A wrench or a key that is left attached to a rotating part of this
cable drum machine may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times. Proper
