12
TROUBLESHOOTING
TROUBLESHOOTING
TROUBLESHOOTING
TROUBLESHOOTING
TROUBLESHOOTING
•
The radio control fails to operate:
The radio control fails to operate:
The radio control fails to operate:
The radio control fails to operate:
The radio control fails to operate:
Check the position of switch N° 2 which must always be OFF
switch N° 2 which must always be OFF
switch N° 2 which must always be OFF
switch N° 2 which must always be OFF
switch N° 2 which must always be OFF. The codes
of the radio controls will have been cancelled from the memory of the module
if this switch has been accidentally set to the ON position and must therefore
be memorized again as indicated in the RADIO CONTROL AUTO-
LEARNING MODE procedure described in this manual.
•
The hazard lights fail to come on when the system is armed/disarmed:
The hazard lights fail to come on when the system is armed/disarmed:
The hazard lights fail to come on when the system is armed/disarmed:
The hazard lights fail to come on when the system is armed/disarmed:
The hazard lights fail to come on when the system is armed/disarmed:
Use a warning light to check that the positive command is transmitted in the
two YELLOW coloured wires (two pulses on arming and one on disarming).
If this command is present, check for faults in the car connections.
•
The central locks fail to operate:
The central locks fail to operate:
The central locks fail to operate:
The central locks fail to operate:
The central locks fail to operate:
Check the condition of the fuses in the harness wires. If the fuses have
burnt out, identify the incorrect connection before changing them.
TECHNICAL FEATURES OF THE SYSTEM
TECHNICAL FEATURES OF THE SYSTEM
TECHNICAL FEATURES OF THE SYSTEM
TECHNICAL FEATURES OF THE SYSTEM
TECHNICAL FEATURES OF THE SYSTEM
Power source voltage rating .................................................................. 12 VDC
Operating voltage rating .................................................................... 9 /16 VDC
Power draw at 12 VDC .............................................................................. 5 mA
Operating temperature .................................................................... -40° +85°C
Window winding with negative command ............................................ max 1 A
