Getting Started
Display Control
•
Illumination
The display illumination intensity can be adjusted to suit driving conditions:
■
Bright
for daytime driving. (Factory default is Bright, then
Display Timeout after 30 seconds.)
■
Dim
for dusk driving.
■
Dimmer
for night driving.
■
Dark
to blank the screen for discreet use. In this mode, alerts will sound,
but not show. (A dot will blink at the center of the screen to indicate the
detector is ON.)
You can adjust the illumination by pressing the
Dim
button to step through
the levels in the sequence listed above.
Display Timeout
Your detector has a
Display Timeout
mode. When Display Timeout is turned
On (factory default is 30 seconds), the screen will change to Dark from Bright,
Dim, or Dimmer after the time interval selected in Menu mode (see page 13).
The Display Timeout setting can be changed so the display is always On.
NOTE
While at the Dark level under timer control, any alert or touching any button will
turn on the display at the last brightness setting (Bright, Dim, or Dimmer).
Your Detector
10 English
