Installation
Your Detector
Nothing
Comes Close to a Cobra
®
7
Installation Overview
6
English
1.
Position MDU before actual
mount.
• Do not attempt to adjust
MDU bracket.
• Hold unit in place.
• Using non-permanent
pen, mark two opposite
corners.
2.
Peel off film from two-piece
fastener strips. Align with
two corner markings made
in step 1. Press MDU
bracket against windshield.
• Fastener strips cannot
easily be removed.
Strength of adhesive
strips increases with
time.
• Do not pull on MDU for
first 20 minutes.
Main Detector Unit (MDU)
Global Positioning System Locator
–
(XRS R10G Model Only)
Mount the GPS Locator module to the MDU by plugging it into the USB port.
Figure E –
Internal View
Introduction