Cobra 25 LX User Manual Download

Page: 11 / 22

Operation

Software

Version/Factory

Settings

Software Version/Factory Settings

Displays current software version and returns
unit to original factory settings. To view software
version, rotate Menu/Enter knob clockwise to
select Setting then Software Version.

To restore default settings, Press Menu/Enter
knob again. Rotate Menu/Enter knob clockwise
to select Setting then Go To Default.

Press Menu/Enter knob to restore default
settings. Choose NO to maintain present
setting with no change.

RADIO CHECK

SETTING

CONTRAST

GO TO DEFAULT

SOFTWARE VER

YES

RESTORE DEFAULT

GO TO DEFAULT

SOFTWARE VER

Note
Default display color is green.

When switched to NB mode the RF Noise
Blanker is activated, providing increased

noise filtration.

When switched to OFF mode all noise
filtration will be turned off.

NB OFF Button

RF Gain Control

The RF Gain is used to optimize reception in
strong or weak signal areas.

Note
The RF Gain is used to optimize
reception in weak signal areas.

Note
The RF noise blanker is very
effective in reducing repeti-
tive noises such as ignition
interference.

Rotate the RF Gain knob counterclockwise to

reduce gain in strong signal areas. In weak
signal areas turn clockwise to increase gain.

NB/OFF Button

SIG

+30dB

2 3 4 TX PWR

5 7 9

MEM

VOL

OFF

DYNAMIKE

MIN

RF GAIN

MIN

MAX

U PU

SH ENT

SCAN / M SCAN

DIM / ESC

CB / PA

CH9 / 19

SIG

+30dB

2 3 4 TX PWR

5 7 9

MEM

VOL

OFF

DYNAMIKE

MIN

RF GAIN

MIN

MAX

U PU

SH ENT

SCAN / M SCAN

DIM / ESC

CB / PA

CH9 / 19

25LX_MANL.indd 20-21

11/15/11 9:43 AM

For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)

8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281

Summary of Contents for 25 LX























Search results

Summary of Contents for 25 LX

Reviews:

Related manuals for 25 LX

Brands by name

Popular brands

Cobra 25 LX, User Manual

Search results

Summary of Contents for 25 LX

Reviews:

Related manuals for 25 LX

Brands by name

Popular brands