background image

How Your CB Can Serve You

35

34

Code  Meaning   

10-25  Time is up for contact
10-30   Does not conform to FCC rules
10-33      Emergency traffic   
10-34  Trouble at this station
10-35      Confidential information
10-36      Correct time is
10-37      Wrecker needed at
10-38      Ambulance needed

 

10-39      Message delivered
10-41      Turn to channel
10-42      Traffic accident at
10-43      Traffic tie up at
10-44      Have a message for
10-45      All units within range please report  
10-50      Break channel
10-60      What is next  message number?
10-62      Unable to copy. Use phone
10-63      Net directed to
10-64      Net clear
10-65      Awaiting your next message/assignment

 

10-67      All units comply
10-70      Fire at
10-71      Proceed,  transmission in sequence
10-77      Negative contact
10-81  Reserve hotel room for
10-82  Reserve room for
10-85  My address is
10-91  Talk closer to mic
10-93      Check my frequency on this channel
10-94  Give me a long count
10-99      Mission completed, all units secure
10-200  Police needed at

CB 10-Codes

Citizen Bands have adopted the “10-CODES” for 
standard questions and answers.  These codes 
provide quick and easy communication, especially 
in noisy areas.  Following are some of the more 
common codes and meanings:

Code  Meaning           

10-1       Receiving poorly
10-2       Receiving well
10-3       Stop transmitting
10-4       OK, message received
10-5       Relay message
10-6       Busy, stand by
10-7       Out of service, leaving
10-8       In service, subject to call
10-9       Repeat message
10-10      Transmission completed standing by
10-11      Talking too rapidly
10-12      Visitors present
10-13      Advise weather/roads 
10-16      Make pick up at
10-17      Urgent business
10-18      Anything for us?
10-19      Return to base
10-20      My location is
10-21      Call by phone
10-22   Report in person to
10-23      Stand by
10-24      Completed last assignment
10-25      Can you contact
10-26      Disregard last info
10-27   Moving to channel   
10-28      Identify your station

25LX_MANL.indd   34-35

11/15/11   9:43 AM

For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com) 

8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281

Summary of Contents for 25 LX























Reviews: