background image

Disarming the System

Siren Interrupt

3. Turning on the ignition.
When triggered the Electronic Siren will

sound at 118dB and the hazard lights will

flash for 30 seconds - at the end of this

period the system will close down and

automatically re-set to provide protection

against a further attempt by an intruder to

enter the vehicle.

On return to the vehicle, pressing

operating button ‘A' on the radio key will

disarm the system.  This is indicated by:-
1. One flash of the hazard warning lights.
Note:  If the system has been triggered

during your absence the hazard lights will

flash 4 times and the buzzer will sound 4

times.
2. Extinguishing of the LED warning light

- see note.

3. Unlocking of all doors.

Note:

 If the alarm has been triggered in

your absence a ‘status history' will be

displayed by the LED warning light and is

indicated as follows:-

Single pulse flashing of LED: One

alarm state caused by opening of the

boot, bonnet or doors.
Twin pulse flashing of LED: One

alarm state triggered by optional

microwave sensor.
Triple pulse flashing of LED: Alarm

state triggered by the ultrasonic

sensor or glass break.
Quadruple flash repeated regularly:

Alarm state caused by an attempt to

start the car.

Note:

 This display can also show multiple

triggering and other system diagnostics -

please consult your Cobra dealer in case of

any difficulties.

This display is extinguished when the

ignition is turned on.

Pressing button ‘A' whilst the siren is

sounding will turn the siren off.  The Alarm

System ‘status'  - i.e. ‘armed' - will not be

changed.

Pressing the auxiliary button ‘B' will sound

the siren for 15 seconds whether the alarm

system is in the ‘armed' or ‘disarmed' state.

Note:

 This function will not be operational

during the 40 seconds set-up time

required for the system to become fully

active after it has been ‘armed'.

Ultrasonic Sensor:

To arm the system without utilising the

Ultrasonic interior sensor, press the

operating button ‘A' in the normal way

then, within 20 seconds, press the

auxiliary button ‘B'.  This allows all other

protection circuits to remain active whilst

windows can be left partially open (for a

dog inside the vehicle etc.).  This command

is indicated by a ‘beep' from the siren.

Microwave Sensor:

To arm the system without utilising the

microwave sensor, press the operating

button ‘A' in the normal way and press

button ‘B' twice within 20 seconds.

Panic Alarm/

Personal Protection

Volumetric Protection

Exclusion

4

Reviews: