Settings
Your Detector
Nothing
Comes Close to a Cobra
®
7
Settings
Your Detector
6
English
Settings
•
When changing the
Settings
on your detector, please keep in mind:
■
Each time the unit is turned
On
the factory settings of
Highway
and
Auto Mute-On
will be set. They can be changed while the
unit is in use as described in the following sections.
Highway/City Mode
Setting your detector to
City
mode delays all X band audio alerts at lower
signal strength levels. (A single beep will sound when the signal is first
detected.) This will reduce false alerts while you are driving in, or near,
urban areas where there are many sources for conflicting X band signals
such as microwave towers and automatic door openers.
To change settings, follow the procedure listed below, which indicates
what you will see and hear as you complete each step. The factory setting
is
Highway
mode.
City Button
Press and release
City Mode
Highway Mode
To Change From Highway Mode To City Mode
Press and release
the
City
button.
Tone
Visual Display
One (1) beep
Cty
appears in the display
To Change From City Mode Back To Highway Mode
Press and release
the
City
button again.
Tone
Visual Display
Two (2) beeps
Cty
off
•
X
K
⁄
Ka
L
V
⁄
S
Cty
•
X
K
⁄
Ka
L
V
⁄
S
Cty
Muting An Alert
Your detector allows you to quickly turn
Off
an audio
Alert
by momentarily
pressing the
Mute
button. If you press the
Mute
button a second time
during the
Alert
, the audio
Alert
will be turned back
On
.
Auto Mute Mode
Auto Mute
will automatically reduce the audio volume of all alerts
after four (4) seconds for as long as the signal is detected. The factory
setting for
Auto Mute
is
On
.
Mute Button
Press and release
To Turn Auto Mute Off
Press and release
the
Mute
button
while no alert
is occurring.
Tone
Visual Display
One (1) beep
None
To Turn Auto Mute On
Press and release
the
Mute
button
again while no
alert is occurring.
Tone
Visual Display
Two (2) beeps
None
ESD767_Body.qxd:7000-Body 10/21/08 9:28 AM Page 6
