15
When you change the blade, Must use the original type marked on the blade (Cobra 2105300134) Contact
your local Cobra dealer.
WARNING:
Remove the battery from the machine.
WARNING:
Protect hands by using heavy gloves or a rag to grasp the cutting blades when replacing
the blade.
8. MAINTENANCE AND CARE
Warning
:
Before performing any Maintenance or cleaning work, Always remove batteries and
switch off the isolator key!
Do not spray the unit with water. Ingress of water may destroy the switch and the electric motor. Clean the
unit with a cloth, hand brush, etc.
Expert inspection is required, do not make any adjustment by yourself, contact your local Cobra
dealer:
a) if the lawn mower strikes an object.
b) if the motor stops suddenly
c) if the blade is bent (do not align!)
d) if the motor shaft is bent (do not align!)
e) if a short-circuit occurs when the cable is connected.
f
) Use only manufacturer’s recommended replacement parts and accessories.
9. STORAGE
The following steps should be taken in order to prepare the lawn mower for storage.
1. Remove the battery pack from the mower and store it at room temperature in a dry location.
2. Clean the mower as described earlier in the maintenance section.
3. Inspect the blade and replace it or sharpen it if required.
4. Check and lubricate the mower.
5. Store the mower in a dry, clean location. Do not store it next to corrosive materials, such as fertilizer or
rock salt.
6. Store the mower in a covered, enclosed space, that is cool and dry and out of the reach of children.
7. Do not cover the lawn mower with a solid plastic sheet. Plastic coverings trap moisture around the mower,
which causes rust.
