Operating Hours
Only operate the product at reasonable hours - not early in the morning, late at night. Check with your local
authorities if there are any specific restrictions.
Switching On and Off
Before you start the machine, make sure that the collection bag is connected correctly and the shoulder strap
ensures the correct posture.
1. Press the on/off switch (1) to turn the product on.
2. Release the on/off switch (1) to turn the product off.
Use the blower to blow garden waste such as, leaves, grass, or twigs together into heaps. Be
careful to not blow debris into bystanders or property nearby.
• Do not blow hard objects such as nails, bolts, or rocks.
• Do not operate the blower near bystanders or pets.
• Use a broom or rake to loosen up firm garden waste from the soil prior to blowing.
• Use extra care when cleaning debris from stairs or other tight areas.
• The motor continues to rotate for a short time after switching off. Wait before putting the tool down.
Wear safety goggles or other suitable eye protection, long trouser and suitable footwear.
Blowing Function
1. Before blowing, loosen leaves that are stuck to the ground using a broom or rake.
2. Hold the tube approximately 10 cm above the ground and walk slowly forward using a sweeping motion
from side to side.
3. Direct the air stream away from yourself.
4. Ensure that you do not stir up any heavy objects and hurt somebody or damage something.
Vacuum Function
1. Push the product in front of you. The guide rollers make it easy to guide the tube along the ground.
2. The leaves will be sucked up into the tube and thrown into the collection bag.
3. Make sure the volume of leaves sucked in at one time is not too large. This will avoid clogging the tube and
blocking the impeller wheel.
Collection Bag
1. Always operate the product with the collection bag attached.
2. Inspect the collection bag each time before use. Do not use it if you detect any damage.
3. Empty frequently during use. Do not wait until the collection bag is completely full. We recommend emptying
it when it is half full.
Note
: A full collection bag reduces the performance of this product.
4. Switch the product off and disconnect it from the power supply.
5. Open the collection bag by its zipper and empty the clippings onto a compost heap.
6. Close the zipper before continuing operation.
10
