Using the Bluetooth
®
Wireless Headset Part I
▶
Charging
- Remove the cover on the charging port and connect the charger.
- When the charger is connected with power on, the Headset will turn off.
- The LED indicator will be on during charging.
It indicates that your headset is being charged.
- Charging will be completed within three hours and the LED indicator
will be turned off.
▶
Low battery
- When the battery power is low, you will hear the melody indicating the
insufficient power. The LED indicator will be blinked and then turn off.
- In this case, please charge the battery again.
▶
Power on
- Press and hold the power/call button for 3 seconds.
- You will hear the melody as the power is turned on.
▶
Power off
- Press and hold the power/call button for 3 seconds.
- You will hear the melody as the power is turned off.
At the same time, the
Bluetooth
®
link will be disconnected.
Using the Bluetooth
®
Wireless Headset Part II
▶
Pairing
- While the power is turned off, press and hold the power/call
button (continue to hold through out the pairing process).
- You will hear the melody indicating that the power is on.
After that, you will hear the short beep.
The LED indicator will start blinking rapidly.
This indicates that the Headset has entered into pairing mode.
- Using your handset, find the ‘
Bluetooth
®
menu’ and ‘search for’ or
‘add’ new devices.
- Select ‘CBTH2’ from the list of devices and pair it with your handset.
- When asked for the Pass/PIN code while pairing, enter ‘0000’.
- When the Pairing has completed, you will hear a beep.
- If you want to pair the Headset with another device, repeat
the above steps.
- If it will be not connected the ‘Pairing’ for five minutes,
the Headset will be turned off.
Search Device
Search Device
Input Password
When turning on the power initially after purchase,
the Headset will enter to the ‘Pairing Mode’ automatically.
6 COBRA OVER THE EAR BLUETOOTH
®
WIRELESS HEADSET
COBRA OVER THE EAR BLUETOOTH
®
WIRELESS HEADSET 7
Summary of Contents for CBTH2
Page 1: ......
