Cobra CXT545 Owner'S Manual Download

Page: 9 / 13

VibrAlert

and Call Alert

•

Your microTALK

radio can alert you to incoming

signals by sounding an audible call tone, by

vibrating silently or both.

To change call settings:
1.

Press the

Mode

button until the

Call Setting

icon flashes on the display. The current setting

(“01” v ring, “02” ring only) is displayed.

Press the

Channel Up

Channel Down

button to

change the call setting.

Choose one of the following:

Press the

Mode

button to enter the new

setting and proceed to other functions.

Press

Talk

Call/Lock

button to enter the

new setting and return to

Standby

mode.

Do not press any buttons for 15 seconds to enter

the new setting and return to

Standby

mode.

Customer Assistance Warranty

Introduction

Operation

Mode Functions

Operation

Mode Functions

Nothing

Comes Close to a Cobra

Ten Call Tone Settings

•

You can choose between ten different

Call Tone Settings

to transmit

a call alert.

To change a call tone setting:
1.

Press the

Mode/Power

button until the

letter “C” and the current call tone number

(01 through 10) is displayed. The current

call tone will sound for three seconds.

Press the

Channel

Down

button

to hear the other call tone settings.

Choose one of the following:

Press the

Mode/Power

button to enter the

new setting and proceed to other functions.

Press

Talk

Call/Lock

button to enter the

new setting and return to

Standby

mode.

Do not press any buttons for 15 seconds to enter

the new setting and return to

Standby

mode.

Call Tone Setting

HI / LO

SCAN

Mode/Power

HI / LO

SCAN

Channel Button

Call Tone On/

Vibrate On

Call Tone On/

Vibrate Off

Roger Beep Confirmation Tone

•

Your listener will hear an audible tone when you release the

Talk

button.

This alerts the other party that you are finished talking and it is OK for

them to speak.

To turn roger beep on or off:
1.

Press the

Mode/Power

button until the

Roger Beep

icon flashes. The current

off

setting is displayed.

Press the

Channel

Down

button

to select roger beep

off

Choose one of the following:

Press the

Mode/Power

button to enter the

new setting and proceed to other functions.

Press

Talk

Call/Lock

button to enter the

new setting and return to

Standby

mode.

Do not press any buttons for 15 seconds to enter

the new setting and return to

Standby

mode.

Channel Button

Roger Beep Off

HI / LO

SCAN

Mode/Power

HI / LO

SCAN

Channel Button

Key Tone On/Off

•

When

Key Tone

, an audible tone will sound each time a button

is pressed.

To turn key tone on or off:
1.

Current key tone status On/Off will flash.

Press the

Channel

Down

button

to select key tone on or off.

Choose one of the following:

Press the

Mode/Power

button to enter the

new setting and proceed to other functions.

Press

Talk

Call/Lock

button to enter the

new setting and return to

Standby

mode.

Do not press any buttons for 15 seconds to enter

the new setting and return to

Standby

mode.

HI / LO

SCAN

Mode/Power

HI / LO

SCAN

Channel Button

Summary of Contents for CXT545














Search results

Summary of Contents for CXT545

Reviews:

Related manuals for CXT545

Brands by name

Popular brands

Cobra CXT545, Owner'S Manual

Search results

Summary of Contents for CXT545

Reviews:

Related manuals for CXT545

Brands by name

Popular brands