background image

Operation

Mode Functions

16

Operation

17

Nothing 

Comes Close to a Cobra

®

Hazards Radio Icon

Weather (WX) Alert Mode 

Turning 

On

 the 

Weather Alert

 function will allow your radio to automatically 

receive NOAA weather signals and warnings from designated weather 

broadcast stations.  If the radio is turned 

ON

, it will alert to Weather and other 

emergency alerts broadcast by NOAA. 

To turn Weather Alert On or Off:
1.

  Press the 

Weather/Lock

 button until the Weather 

Alert icon flashes on the display.  The current 

On

 

or 

Off

 setting is displayed.

2. 

 Press the 

Channel Up

 and 

Channel Down

 button  

to turn Weather Alert 

On

 or 

Off

.

3.

  Press and hold the Weather/

Lock

 button again to 

save the new setting and exit the 

Weather Alert 

Mode

 and return to 

Standby 

mode. 

This feature is set 

to 

OFF 

by default.

Make sure the strongest 

Weather channel is selected 

for your area using the channel 

selection in the previous menu. 

NOAA* All Hazards Radio Channels 

You can use your microTALK radio to listen to 

NOAA All Hazards Radio

 

channels transmitting in your area.

To listen to All Hazards Radio channels:
1.

  Press the 

Weather

 button until the 

All Hazards 

Radio

 icon and the currently selected All Hazards 

Radio channel are displayed.

2.

  Use the 

Channel

 

Up

 or 

Channel

 

Down

  

button to change 

All Hazards Radio

 channels.

3.

  The

 All Hazards Radio

 icon will continue to  

be displayed when 

All Hazards Radio

 is 

on

4. 

To exit 

All Hazards Radio

, press and hold the  

Weather

 button until 

On

 or 

Off

 is displayed.    

*National Oceanographic and Atmospheric Administration

Channel Button

HI / LO

SCAN

Channel Button

HI / LO

SCAN

HI / LO

SCAN

Weather Button

HI / LO

SCAN

Weather Button

CXT645_MANL_vB.indd   16-17

9/24/14   3:15 PM

Summary of Contents for CXT645














Reviews: