1
I N S TA L L AT I O N
Dashboard Mounting
1.
Place the detector on the dashboard
to find a location where the unit has
a clear, level view of the road. The
angle can NOT be adjusted after
mounting.
2.
Remove the paper backing from one
side of the hook-and-loop fastener.
3.
Attach the pad to the dashboard at
your chosen location and remove the
other paper backing.
4.
Attach the detector to the hook-and-loop
fastener. You can remove and reattach
the unit as often as you like.
5.
Plug the power cord into the detector.
6.
Plug the cigarette lighter adapter on
the power cord into your vehicle's
cigarette lighter.
5
2
O P E R AT I O N •
G E T T I N G S TA RT E D
4
1.
Turn on the unit and adjust audio
volume by rotating the
ON-OFF/VOLUME CONTROL DIAL
clockwise (away from you).
2.
You will hear 3 beeps and the Power
Indicator will light up in the display
indicating that the power is on.
NOTE:
In some vehicles, power is
supplied to the cigarette lighter even
while the ignition is off. If this is the
case with your vehicle, you should
turn off or unplug your ESD-9050
when parking for lengthy periods.
X
K
/
Ka
L
V
/
S
Cty
X
K
/
Ka
L
V
/
S
Cty
X
K
/
Ka
L
V
/
S
Cty
X
K
/
Ka
L
V
/
S
Cty
X
K
/
Ka
L
V
/
S
Cty
X
K
/
Ka
L
V
/
S
Cty
X
K
/
Ka
L
V
/
S
Cty
X
K
/
Ka
L
V
/
S
