3. Operating The ESD-6160CS:
A. Turn On and Adjust Volume
B. Set Display Brightness
C. Set Highway/City Mode
D. Muting
E. LaserEye
F. Indicators and Visual Alerts
Power
X Band Radar
K and Ka Band Radar
VG2
Safety Alert
®
Traffic Warning System
Laser
Highway/City Mode
NORMAL
DIM
DIMMER
DARK
Installing and Using Your
DETECTION SYSTEM
Model ESD
™
-6160CS
Cobra Electronics Corporation
6500 West Cortland Street,
Chicago, Illinois 60707
PRINTED IN KOREA
©1998 COBRAELECTRONICS CORPORATION 480-271-P-001
1. What You’ll Need To Install The ESD-6160CS:
NOTE: Detailed instructions on opposite side
ESD-6160CS
Windshield Bracket
Hook and Loop Material
Power Cord
(For on-dash mounting)
ON WINDSHIELD
ON DASH
ATTACH CUPS TO BRACKET
PEEL PROTECTIVE PAPER OFF ONE SIDE OF HOOK AND LOOP
ATTACH BRACKET TO WINDSHIELD
PLACE ON DASH
ATTACH DETECTOR TO BRACKET
PEEL TOP PAPER OFF
BEND BRACKET FOR CORRECT DETECTION ANGLE (IF NEEDED)
PLACE DETECTOR ON HOOK AND LOOP PAD
PLUG POWER CORD INTO DETECTOR
POWER CORD INTO DETECTOR
PLUG POWER CORD INTO CIGARETTE LIGHTER
PLUG POWER CORD INTO CIGARETTE LIGHTER
2. Installing The ESD-6160CS:
NEED HELP?
CITY: For urban
driving-reduces
number of X-Band
false audible alerts.
HIGHWAY: For all
other driving.
Press to reduce
volume of audible
alert in progress.
360° Laser
Detection
The unit will chirp 3
times and the red
single digit display
will illuminate .
Either an , or will illuminate
when the unit is on.
Blinks faster as source approaches
Blinks at a steady rate
Blinks faster as source approaches
X
K/Ka
VG2
Both the red SA LED and the
single digit display will illumi-
nate for the Safety Alert signal.
SA
Emergency
Road Hazard
Railroad
Blinks at a steady rate
Highway
City
ESD-6160CS.MANUAL.qx 10/23/98 4:52 PM Page 1
