CARTS AND TRAILERS
5
Parts List and
Tools Required
ATTACH HANDLE ASSEMBLY
Handle Assembly (1)
M8 Lock Washer (6) M8 Flat Washer (6)
M8 Hex Nut (6)
Flat Screwdriver
Socket/Wrench Set
M8x50 Bolts (6)
M8x50 Bolts
M8 Washers
M8 Nuts
A
M8x50 Bolts
M8 Washers
M8 Nuts
B
NOTE
: Fasteners needed to secure the handle
assembly to the tub are attached to both the
support and handle assembly.
Insert all bolts through the dump cart tub with
the head of the bolts to the inside of the tub
.
Align the holes of the handle assembly with
1.
the holes of the support.
Secure handle assembly and support to the
2.
tub using four (4) M8x50 bolts, four (4) M8
flat washers, four (4) M8 lock washers, and
four (4) M8 hex nuts. See diagram A.
Secure the handle to the edge of the tub
3.
using two (2) M8x50 bolts, two (2) M8 flat
washers, two (2) M8 lock washers, and two
(2) M8 hex nuts as shown in diagram B.
Tighten all bolts.
4.
