6
Parts List and Tools Required
If needed, remove the axle, washers, and cotter pins
1.
and set the axle and fasteners aside in a safe place.
Position the dump lever assembly, with the spring
2.
facing up, onto the support and into the center
space of the axle plate as shown in the photo to the
right.
Insert the axle through the axle plate and through
3.
the hole in the dump lever assembly as shown in
diagrams A and B.
Pull the dump lever, press the assembly against
4.
the support and slide the notch in the lever over the
support as shown in diagram C to secure the two
components.
ATTACH DUMP LEVER ASSEMBLY
Dump Lever
Lever Notch
A
B
C
Dump Lever Assembly (1)
Dump Lever
Axle (1)
COBRA CARTS AND TRAILERS - INSTRUCTION MANUAL