Nothing
Comes Close to a Cobra
®
English
6
7
Settings
Settings
Your Detector
Intro
Operation
Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Your Detector
Intro
Operation
Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Quiet Drive
is a muted driving mode for times when a driver wants less audible
feedback while talking with passengers, on the phone, etc. Only the first few
seconds of audio will be heard. This mode is
Off
by default.
This mode can be changed in the User Settings menu or by pressing and holding
the MUTE button for two seconds. When Quiet Drive is on the audio icon on the
display will change to
Battery Voltage
To display your vehicle’s battery voltage, press the MUTE button while no signal
is being detected.
DIM Button
You can choose from four settings for the brightness of the display. Repeatedly
push the DIM button to cycle through the settings. The factory setting is Bright.
Menu - User Settings
•
To change the User settings enter the Menu by pressing the
MENU
button. A voice
announces “Menu” and the display will change to
Press the
DIM
button to enter the User settings menu.
Press the
MUTE
or
MENU
buttons to switch between the User settings.
Press the
DIM
or
SEN
buttons to change the selected User setting’s value.
The value that is shown on the display is the selected value. To exit the menu
simply wait several seconds or select
Exit Menu
.
USER MENU ALERT
MUTE Button
Manual Mute:
Your detector allows you to quickly turn OFF an audio alert by
momentarily pressing the MUTE button. If you press the MUTE button a second
time during the alert, the audio alert will be turned back ON. When an alert is
being muted the audio icon on the display will change to
USER SETTING
VALUE
Detail
More*/Less
Quiet Drive
Off*/On
Auto Mute
Off/On*
Voice
Off/On*
Language
English*/Spanish
Screen Saver
Off/1 Minute*/3 Minute
Low V. Warning
Off*/On
Smart Power
Off*/On
System Info
Press the SEN button to display system information.
Restore Defaults
Press the SEN button to restore factory default settings
then press SEN button again to confirm.
Exit Menu
Press the MUTE button to exit the menu.
* = Factory default setting
iRAD_MANL_vB.indd 6-7
8/24/16 10:05 AM
