background image

Customer Assistance Warranty

Introduction

17

Operation

16

Mode Functions

Operation

To de-program a memory location:
1.

  Press the 

Mode

 button until the 

Memory 

icon and the memory location 

flash on the display.

2.

  Press the 

Channel Up

 or 

Channel Down

 

button to select the memory location  

(0 through 9).

If a location has been programmed 

before, its associated channel/privacy 

code will be shown on the display.

3.

  Press the 

Lock/Enter

 button. The channel 

numbers will flash on the display.

4.

  Press the 

Channel Up

 or 

Channel Down

 

button to select Channel 0.

5.

 Choose one of the following:

    

a.

  Press the 

Lock/Enter

 button to enter 

the channel/privacy code in the selected 

memory location and return to the 

beginning of memory location options. 

    

b.

  Press the 

Mode

 button to 

enter the channel/privacy code in  

the selected memory location and  

proceed to other functions on the channel/

privacy code displayed  

before you entered mode functions.

While de-programming a memory location,  

if you do not press any buttons for 15 seconds, 

your radio will automatically return to 

Standby

 

mode on the channel/privacy code displayed 

before you entered mode functions.

To recall a stored memory channel location:
1.

  Press the 

Mode

 button until the 

Memory

 icon 

and the memory location number flash on the 

display.

2.

  Press the 

Channel Up

 or 

Channel Down

 

button to select a memory location  

(0 through 9). 

If a location has been programmed 

before, its associated channel/privacy 

code will be shown on the display.

3.

  Press the 

Talk

 button to return to 

Standby 

mode on the selected memory location.

A memory location can be reprogrammed 

at any time it is displayed and flashing. 

Press the 

Lock/Enter

 button to begin.

While recalling a stored memory location,  

if you do not press any buttons for 15 seconds, 

your radio will automatically return to 

Standby

 

mode on the channel/privacy code displayed 

before you entered mode functions.

Memory Icon

Channel 0

Mode Button

Memory Icon

Mode Button

LI 7300

Channel Button

LI 7300

Channel Button

LI 7300

Lock/Enter Button

CXR925_MANL.indd   16-17

7/15/09   5:12 PM

Summary of Contents for microTALK CXR925


















Reviews: