Radar Alert Settings
(continued)
Settings
Your Detector
Nothing
Comes Close to a Cobra
®
15
Settings
Your Detector
14 English
Dim Button
Press and hold for four seconds
Spectre I & IV+
and VG-2 On
Spectre
& VG2
On
Spectre I & IV+
and VG-2 Off
Spectre
& VG2
Off
To Turn VG-2 and Spectre I & IV+ Alerts On and Off
While no signal
is being detected,
press and hold the
Dim
button for
four seconds.
Tone
Voice
Visual Display
On = Two Beeps
Spectre VG-2
On
Spectre & VG2 On
blinks
in the display
Spectre VG-2
Off
Spectre & VG2 Off
blinks
in the display
Off = One Beep
To Turn K Band On and Off
While no signal
is being detected,
press and hold both
the
Mute
and
City
buttons for
four seconds.
Tone
Voice
Visual Display
K On = Two beeps
K On
K On
blinks in the display
To Turn Ku Band* On and Off
While no signal
is being detected,
press and hold the
City
button for
four seconds.
Tone
Voice
Visual Display
Ku On = Two beeps
Ku On
Ku On
blinks in the display
K Off
blinks in the display
K Off = One beep
K Off
Ku Off
Ku Off
blinks in the display
Ku Off = One beep
VG-2 and Spectre I & IV+ Alert Settings
Police use radar detector detectors (RDDs) to spot users of radar detectors.
Your detector is able to identify signals from
VG-2
,
Spectre I
and
Spectre IV+
RDDs and can provide alerts when any of these or similar devices are in use
near your vehicle.
Your detector
can
be spotted by Spectre IV+ RDDs, but is invisible to VG-2 and
Spectre I RDDs. You can choose whether you want to be alerted to VG-2 and
Spectre I & IV+ RDD signals. The factory setting for VG-2 and Spectre I & IV+
alerts is Off.
Pop Alert
The Pop Mode Radar Gun is a single-pulse Doppler radar that is a feature
of a K and Ka (Bee III Ka radar gun) band Instant-On radar gun. It uses
a single, short-time pulse to measure the target vehicle’s speed.
The Pop mode receiver senses Pop singles beyond the effective range of
Pop radar guns. As the Pop mode receiver is so sensitive, you should limit
the use of Pop Detect mode to highway and rural driving.
Pop Alert
will alert you to Pop radar signals. During the alert, the unit
continues to detect other signals. The factory setting is Pop Detect Off.
To Turn Pop Alert On and Off
While no signal
is being detected,
press and hold both
the
Dim
and
City
buttons for
four seconds.
Tone
Voice
Visual Display
Pop On = Two beeps
Pop On
Pop On
blinks in the display
Pop Off
Pop Off
blinks in the display
Pop Off = One beep
Radar Alert Settings
The detector allows you to choose whether it will show alerts on the
X
,
K
,
and
Ku
Band
s. The factory settings are: X Band and K Band On; Ku Band Off.
To Turn X Band On and Off
While no signal
is being detected,
press and hold both
the
Dim
and
Mute
buttons for
four seconds.
Tone
Voice
Visual Display
X On = Two beeps
X On
X On
blinks in the display
X Off
X Off
blinks in the display
X Off = One beep
XRS9570_MANL.indd 14-15
8/24/10 9:25 AM
