background image

Nothing comes close to a Cobra

®

33

Warranty

32 English

Warranty

Limited 1-Year Warranty

For Products Purchased In The U.S.A.

Cobra Electronics Corporation warrants that its Cobra 11 Band Radar/Laser 
Detectors, and the component parts thereof, will be free of defects in
workmanship and materials for period of one (1) year from the date of first
consumer purchase. This warranty may be enforced by the first consumer
purchaser, provided that the product is utilized within the U.S.A.

Cobra will, without charge, repair or replace, at its option, defective 11 Band
Radar/Laser Detectors, products or component parts upon delivery to the
Cobra Factory Service Department, accompanied by proof of the date of first
consumer purchase, such as a duplicated copy of a sales receipt.

You must pay any initial shipping charges required to ship the product for
warranty service, but the return charges will be at Cobra’s expense, if the
product is repaired or replaced under warranty.

This warranty gives you specific rights, and you may also have other rights 
which vary from state to state.

Exclusions:  This limited warranty does not apply: 

1. To any product damaged by accident.  

2. In the event of misuse or abuse of the product or as a result 

of unauthorized alterations or repairs.  

3. If the serial number has been altered, defaced or removed. 

4. If the owner of the product resides outside the U.S.A. 

All implied warranties, including warranties of merchantability and fitness for 
a particular purpose are limited in duration to the length of this warranty.

Cobra shall not be liable for any incidental, consequential or other damages;
including, without limitation, damages resulting from loss of use or cost of 
installation.

Some states do not allow limitations on how long an implied warranty lasts
and/or do not allow the exclusion or limitation of incidental or consequential
damages, so the above limitations may not apply to you.

Specifications

Your Detector

Specifications

Band And Frequencies

Band

Frequencies

X Band

10.525

± 0.050

GHz

K Band

24.125

± 0.125

GHz

Safety Alert

24.070

± 0.010

GHz

Traffic Warning

24.110

± 0.010

GHz

System

24.190

± 0.010

GHz

24.230

± 0.010

GHz

Ka Band

34.700

± 1.300

GHz

Laser

910

± 50

nm

Strobe

700

± 300

nm

Unit Dimensions And Weight

Dimensions* (H x W x D)

Weight*

1

1

2

" x 3

1

16

" x 4

7

8

6.45 oz. 

(38 mm x 78 mm x 124 mm)

(183 g)

* Dimensions and weight measurements are approximate.

This radar detector is covered by one or more of the following U.S. patents: 5,497,148; 5,594,432;
5,612,685; 6,078,279; 6,094,148; 6,621,447. Additional patents may be listed inside the product 
or pending. 

Summary of Contents for XRS 777





















Reviews: