Program/Mute Button
Press and release
To Turn Turn Off Or On An Audio Alert Using The Program/Mute Button
Press and release
the Program/Mute
button.
Tone
Visual Display
None
None
Nothing comes close to a Cobra
®
13
Settings
Your Detector
12 English
Auxiliary
Audio Jack
To Turn Auto Mute Off Or On Using Program Mode
(See Page 7 For Instructions On Using Program Mode)
In Program mode,
go to Auto Mute.
Tone
Visual Display
Voice
One (1) beep
Auto Mute Off
Auto Mute Off
Two (2) beeps
Auto Mute On
Auto Mute On
Auxiliary Audio Jack
The Auxiliary Audio Jack can be used to connect an external speaker
in environments with high ambient noise levels. The internal speaker
will be disconnected.
Muting An Alert
Your detector allows you to quickly turn off an Audio Alert by momentarily
pressing the Program/Mute button. If you press the Program/Mute button
a second time during the Alert, the Audio Alert will be turned back on.
Auto Mute Mode
Auto Mute will automatically reduce the audio volume of all alerts after
four (4) seconds for as long as the signal is detected. The factory setting
for Auto Mute is on.
Voice Alert And Tone Alert Modes
You can set your detector to sound alerts and confirm user settings with
either a Voice or a Tone. The factory setting for Alert mode is Voice.
To Select Voice Or Tone Mode Using Program Mode
(See Page 7 For Instructions On Using Program Mode)
In Program mode,
go to Voice/Tone.
Tone
Visual Display
Voice
One (1) beep
Tone
Tone Alert
Voice Alert
Voice
Voice Alert
AutoMute Off
Auto Mute Off
AutoMute On
Auto Mute On
