•
Attention the installation of the heating elements must be carried out by
qualified personnel.
•
Detect the center distance of the wall attachment and fix the two well-leveled
beams. Attention: use the plugs suitable for the type of existing wall Fig. A
•
Hang the radiator on the beams making sure it is properly engaged Fig.B
•
Engage the safety coupling (normally present only in the electric versions) and
tighten the screw tightly. Fig. C
•
Connect the radiator to the valves, refill by acting on the air vent.
•
Verify that there are no water leaks. In case of leaks, close the valves
immediately and call Cobrillo technical assistance.
•
Mount the cover on the radiator only after completing the complete installation
procedure.
ASSEMBLY INSTRUCTIONS - PLATE
2
CONTENTS OF THE BOX
The packaging contains:
•
Wall fixing brackets painted with Polyester powders in the same color as the
radiator
•
½ "manual air vent valve and male cap with ½" o-ring
•
Instruction and use manual
•
Only in the case of installation of the radiator with IF plate connection
(concealed installation behind the radiator) the package contains manual
reversal valve, manual reverse lockshield and the adapters specified when
ordering
Keep the original packaging until the radiator is completely installed
