background image

21

22

1.

The Warranty Policy for the Product is: 

one year for replacement, two years for warranty . 

2.

Any malfunction or failure of the Product resulting from normal operation and application 

according to the User’s Manual (which shall be subject to judgement and verification by regular staff 
of the Company) during Warranty Period will be fixed and repaired by us free of charge. 

3.

In any of following cases during the Warranty Period, we may provide repair services by charging 

relevant repair fee.

(1)

Can not provide this guarantee, valid purchase certificate and the machine only two-dimension-

al code serial number.

(2)

Failure of or damage to the Product caused by the User due to his/her improper operation or 

application or authorized repair activities.

(3)

Failure of or damage to the product due to rough transportation, handlingor falling after its 

purchase.

(4)

Damage to the Product caused by water or other solutions entering into the Product due to improper 

operation.

(5)

Damage to the Product caused by the user’s failure to use designatedpower supply or voltage. 

 

4. 

Appearance of the Product, its vulnerable and consumable parts and accessories are not covered 

in the warranty scope. 

   

PRODUCT AFTER-SALE SERVICE&WARRANTY CARD 

     

PACKING LIST

Part name

Bidet Seat

Installation guide

Product Manual and Certificate

Assembly of remote controller

Quantity

Attachment of remote controller

Attachment of  Installation

( T-Valve、water inlet、installation bolts、installation nuts、

installation board)

Assembly of Installation 

Assembly of filter

Note: The parts with * are optional, please erfer to the actual situation while there are any 

 discrepancies.

Summary of Contents for CBD1805













Reviews: