4. Cut the tubing up to the
notch on the earhook,
making sure you do not cut
it too short.
5. Attach the tubing to the
earhook by pushing the
tubing up to the notch on
the earhook.
To remove the Mic Lock, ease the tubing off the earhook and slide the
Mic Lock band away from the processor.
You can use the Mic Lock - Stirrup with the battery pack.
To wear the Mic Lock - Stirrup:
1.
Clip the Mic Lock - Stirrup
into the two holes at the
upper end of the battery
pack cable.
2. Place the processor on your
ear.
3. Bring the tubing around
to the front and up to the
earhook.
14 - CP802 Sound Processor User Guide
© Cochlear Limited 2016
Summary of Contents for Nucleus CP802
Page 1: ...Nucleus CP802 Sound Processor User Guide...
Page 55: ......
