To use an FM cable:
1.
Connect the FM cable to the Freedom Accessory Adaptor.
2. Connect the Freedom Accessory Adaptor to the processor
accessory socket.
3. Connect the FM listening system end of the FM cable to the FM
listening system as per manufacturer's instructions.
To use the Mains Isolation Cable:
1.
Connect the Personal Audio Cable or the Bilateral Personal Audio
Cable to your processor.
2. Connect the Mains Isolation Cable to the Personal Audio Cable or
the Bilateral Personal Audio Cable.
3. Plug the other end of the Mains Isolation Cable into the mains
powered sound source, e.g. TV.
Mains powered sound source end (1) and Personal/Bilateral Personal Audio Cable end
(2) of the Mains Isolation Cable
When you connect an audio accessory, your processor automatically
detects it. When you are not using the audio accessory, you can
disconnect it from the processing unit.
Changing from an audio accessory to microphones
You can change from using an audio accessory to using the
microphones only, while leaving the audio accessory attached.
To change from using an audio accessory to using the microphones,
press the upper button. A single long flash of orange confirms that the
microphones are enabled.
Changing from microphones to audio accessory
To change back from using the microphones to using the audio
accessory, press the upper button again. A single long flash of green
confirms that the audio accessory is enabled.
1
2
© Cochlear Limited 2016
CP802 Sound Processor User Guide - 41
Summary of Contents for Nucleus CP802
Page 1: ...Nucleus CP802 Sound Processor User Guide...
Page 55: ......