Figure 14: Placing the coil on the back of the remote assistant
If the coil is receiving sound signals from your processor, the coil check
and pair screen displays. This only indicates that the coil is receiving
sound signals and does not confirm that the coil is functioning properly.
If the coil is not receiving sound signals, the coil check and pair screen
will not display.
For more information, refer to the Remote Assistant User Guide.
Auto Processor Off
Your processor automatically turns off when the coil is off (e.g. coil
is not placed on your head) for more than two minutes. The coil-off
indicator light (flashes of orange) flashes until the processor turns off.
If you change a processor setting (using either the processor buttons
or the remote assistant) while the coil-off indicator light is flashing, the
processor will turn off two minutes after making the change.
Your clinician can enable or disable the Auto Processor Off feature.
58 - CP810 Sound Processor User Guide
© Cochlear Limited 2015
Using your processor
