13
COCHLEAR NUCLEUS 6 • HYBRID HEARING SUPPLEMENT
Care for your acoustic component
The acoustic component is used only by people who are set up to use their
processor in Hybrid mode.
If you use Power or Plus Domes
Every day
• Check the dome and its filter. Change the dome whenever its filter
is clogged with wax, or whenever the dome is dirty, discoloured or
losing shape.
• When changing the dome, also check the wax filter in the speaker unit.
Change the speaker unit filter whenever it is clogged with wax or if the
sound from the speaker unit does not sound normal.
If you use RITE Power or Power Micro Moulds
Every day
• Clean the earmould and speaker unit cable with the supplied brush
or a soft dry cloth. Wipe any traces of wax away from the opening
of the vent.
• Check if the vent is clogged, and use the supplied vent cleaner to remove
wax as needed. Do NOT use the vent cleaner to clean any other part.
• Check the wax filter and change whenever it is clogged with wax or if the
sound from the speaker unit does not sound normal.
CAUTION
Handle and store the acoustic component
very carefully. Do not drop the acoustic
component. Do not twist the speaker unit cable.
Keep the speaker unit away from the coil magnet.
NOTE
Power Micro Moulds can use Cochlear
EAC200 Series WaxStop Wax Management
System filters ONLY.
RITE Power Moulds can use either Cochlear
EAC200 Series NoWax Wax Management
System or WaxStop filters.
Summary of Contents for Nucleus CP910
