TMT-502 REMOTE CONTROL WITH TIMER
Remarks
Reminders
•
This product must be used in combination with at least one COCO receiver. The wireless system can
be expanded indefinitely with other COCO remote controls and/or receivers.
•
This product is a combination of a remote control and a timer. Remote control: Control one (or more)
COCO receiver(s). Timer: Switch a COCO receiver on and off at the desired time.
•
If the product does not work or does not work properly:
- Check the correct placement and/or function of the batteries (replace if necessary).
- Check step for step whether everything is programmed correctly.
- Make sure the set "house code" (see
[4]
) of this product is the same as on the COCO receiver(s) that
are to be controlled. The numeric code of the receiver(s) must match the channel (“Unit”) on this
product (see
[9]
).
- Perhaps someone nearby is using the same house code. Set the wireless COCO system to another
letter code combination.
Dimming function
•
The dimming function only works if the concerned receiver is suitable for this function. For more details
concerning the dimming function, see the manual for the dimmer receiver.
•
The dimming function cannot be pre-programmed with the timer.
•
Do not program dimmer receivers and on/off receivers for operation with the same button on the remote
control.
•
Do not program multiple dimmer receivers for operation with the same button on the remote control;
use separate buttons.
Safety instructions
•
This product is equipped with child protection with which the programming buttons can be locked: Press
the “
/
DEL
” and “
ENTER
” buttons simultaneously for
3 seconds
. “C.P.” (Child Protection) appears on
the screen. Do the same to deactivate the child protection.
•
Do not expose this product to excessive heat, direct sunlight or moisture.
13
