11
5.8 GHz Dual-Input Audio/Video Sender System - AVS58
www.cocoonsystems.com.au
6.4 C
onnECtInG
V
IA
Rf (
AERIAl
) C
onnECtIon
Optional: If your receiving TV does not have RCA (AV) inputs (older TVs), then instead of
the RCA cable you may use an RF (aerial) cable (not included). Connect this cable be-
tween the TV-OUT port of the Receiver and the RF (antenna) input of the TV. With this op-
tion the output from the receiver is modulated to a UHF TV channel. To view the Receiver
signal with this option, you will need to tune the TV to a UHF channel - please consult your
TV’s manual for instructions.
6.5 C
onnECtInG
tHE
m
AInS
A
DAptER
Connect the mains adapter for the Receiver to the 7.2V socket (labelled DC 7.2V).
Plug the adapter into a wall socket (2V0V a.c. ~ 50Hz).
Set the ON/OFF switch to the ON position. The operating LED will illuminate.
Raise the Receiver aerial and direct it towards the location of the Transmitter.
6.6 E
xAmplES
of
t
ypICAl
C
onnECtIon
C
onfIGURAtIonS
- R
ECEIVER
Fig. 6.6.1
This is an example of a typical setup connecting the AVS58 Receiver to the receiving TV
via RCA connections (recommended). The diagram also shows how to connect the Receiver via RF
connection for older TVs without RCA inputs.
AUDIO / VIDEO IN
INPUT 1
INPUT 2
L
R
V
L
R
V
Y
W
R
A/V OUT
DC 7.2V
1
2
TO TV
RF IN
FOR TROUBLE SHOOTING TIPS SEE PAGES 14-15
FOR MORE WIRING EXAMPLES & HELP - PLEASE VISIT WWW.COCOONSYSTEMS.COM.AU
W = White (Audio - Left)
R = Red (Audio - Right)
Y = Yellow (Video)
Optional: This is a standard RF connec-
tion for older TVs without RCA AV inputs
(cable not included)
