10
After Sales Support
Telephone:
1300 663 907
Internet:
www.winplus.com.au
pairing to your Bluetooth enabled Mobile phone
1. Place your Bluetooth enabled phone and the Bluetooth receiver
near each other. Within 1m is recommended.
2. Make sure the Bluetooth receiver is turned on.
3. Press and hold down the power/intercom button for approximately
8 seconds until the receiver beeps twice. The red and blue LEDs will
flash alternately. The receiver is now actively searching for Bluetooth
devices.
4. Activate Bluetooth on your mobile phone and search for the device.
Refer to your phones instructions if you are unclear on how to
search for Bluetooth devices.
5. Choose the Bluetooth device named FDC-01 and choose to pair this
device. If you are asked for a password, enter 0000.
6. The red & blue LEDs will then change to display blue only and the
headset will beep once to confirm pairing was successful.
To Answer an Incoming Mobile phone Call
1. Press the Multi Function button on the receiver while the phone is
ringing
2. Use the jog wheel to increase or decrease the headset volume.
Tip: The incoming call will answer automatically once the phone
has rung for 8 seconds.
