8
Reset to Factory Settings
The Cocoon GPS Tracker can be reset to factory settings by using the following
command. This can be useful if you forget your password.
Warning: All settings, data and preferences will be lost and reset to a default state.
1.
To reset the Cocoon GPS Tracker to factory settings SMS RESET!
Note: unlike other SMS commands, no reply will be sent to indicate the
device has accepted the command. The exclamation point must be
included in the command for it to be accepted
Checking the Authorized Numbers & Status of Features
1.
To request a list of authorized numbers and the current status of the
Cocoon GPS Tracker, SMS [PAG
For example, if your password is 123456 you would SMS
123456G
to the
Cocoon GPS Tracker
2.
The device will reply “A[AUTHNUMBER], B[AUTHNUMBER], C
[AUTHNUMBER], Speed: 0,100km/h, GEO:0,0,0, Coord Sv:0, Listen-in:0,
UTC-T:0.0, Motion:0,Movement:0,0, Bat:100”
Changing the password
Note: The default password is 123456. It is recommended that you change this password.
1.
To change the password of the Cocoon GPS Tracker, SMS
[PAH+[NEWPASSWORD]
For example, if your password is 123456 and you would like to change it to
987654 you would SMS
123456H987654
to the Cocoon GPS Tracker
2.
Make sure the new password is 6 Digits or it will not be recognized
NOTE: Letters and numbers can be used for the password.
Symbols will not be recognized
Summary of Contents for GT42395
Page 27: ...27 Notes ...
Page 28: ...28 ...