9
After Sales Support
1300 663 907
Model Number
HE115020
03/2015
customercare@winplus.com.au
Instructions
Connection Guide
1.
Remove all items from packaging.
2.
Using the supplied HDMI cable, connect the AMP TV to your TV. Connect the HDMI
cable to the port marked ‘HDMI’ on the rear of the AMP TV and then to an HDMI input
on your TV. Ensure your TV is set to display the correct HDMI input, for example HDMI1.
3.
Connect the power adaptor to a power outlet then connect the cord to the rear of the
AMP TV in the port marked ‘DC 5V’.
4.
Turn the power adaptor on at the socket.
5.
Once connected, the AMP TV will automatically begin booting up (ensure your TV is
turned on).
Other Connections
USB & MicroSD Storage (Such as Memory Stick or MicroSD card):
If you wish to play
media from a USB device, connect it to one of the two USB ports on the AMP TV. You can
also insert a MicroSD card into the ‘Micro SD’ slot.
Wired Internet:
If you will be using wired internet with the AMP TV, connect an Ethernet
cable (not included) to the ethernet port on the back of the device.
AV Output:
If your television or monitor does not have an HDMI port, you may also use a
3.5mm to RCA adaptor (Not included) in the AV out port on the back of AMP TV. (Available
at most electronic stores).
Turning On/Off
1.
Whenever the unit is first plugged in to a power source, it will automatically turn on.
2.
To put the AMP TV into sleep mode, press the Power button on the remote (Shown on
page 8).
3.
To wake the AMP TV from sleep mode, press the Power button on the remote.
NOTE: Powering off and then on will take you back to the main screen. To resume a video
file you have stopped mid-way, you must navigate back to the file and resume.
HE115020 - Media Player Manual.indd 9
15/01/2015 11:59 am
