5
EN
G
LI
SH
• Keep the work area clean and tidy, make sure that the cooling of the electric motor is not hindered by debris
blocking the air intake.
•
Note:
Loosen the the bleed screw (7) 3–4 turns, so that there is a noticeable flow of air when the log splitter
is in operation, otherwise the gaskets in the hydraulic system could be damaged and render the log splitter
inoperable.
• Make sure that the nuts on the ends of the pull rods are tight before operation, otherwise the log splitter
could become damaged.
Product safety symbols
!
!
!
!
!
!
!
!
!
!
!
!
Warning:
Risk of crushing. Keep hands well away from any moving parts during the entire
splitting operation.
Warning:
Risk of crushing. Never remove a jammed log with your hands, always use a tool.
Warning:
Risk of crushing. Always pay attention to the motion of the pressure plate.
No-one other for than the operator must stand within the danger zone of the log splitter.
Keep children, pets and bystanders away!
Switch the machine off and unplug it before all cleaning, maintenance and whenever it is not being used.
Inspect the log splitter for any damage before operating it, pay particular attention to the mains lead,
make sure that none of the nuts and bolts are loose and that the hydraulic control lever and its cover
work properly.
Read the instruction manual.
Read the entire instruction manual and familiarise yourself with the operation of the log splitter before
starting to operate it.
Wear eye protection.
Protect your eyes from wood chips and splinters. Use protective glasses or a visor.
Wear safety gloves.
Wear safety footwear.
Footwear with steel toe caps should be used to protect your feet from falling objects.
Consider the environment, dispose of waste oil in accordance with local regulations.
