EN
G
LI
S
H
3
Car Polisher
Art.no 18-3578
Model Q1L-YJ20-240-UK
40-9524
Q1L-YJ20-240
Please read the entire instruction manual before using the product and then save it for future
reference. We reserve the right for any errors in text or images and any necessary changes
made to technical data. In the event of technical problems or other queries, please contact our
Customer Services (see address details on the back).
Safety
General safety instructions for power tools
Warning: Read all the instructions.
Failure to adhere to the following instructions may lead to electric shocks, fires or serious injuries.
SAVE THESE INSTRUCTIONS.
The term “power tool” in the following text refers to your handheld mains operated or battery
operated tool.
1) Work area
a)
Keep the work area clean and well illuminated.
Cluttered and poorly lit areas invite accidents.
b)
Do not operate power tools in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust.
Power tools generate sparks that can easily ignite dust or fumes.
c)
Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose concentration and control of the tool.
2) Electrical safety
a)
The power tool plug must fit correctly into the wall socket. Never modify the plug in
any way. Never use an adaptor plug together with earthed power tools.
Unmodified
plugs and suitable wall sockets minimize the risk of electric shocks.
b)
Avoid physical contact with earthed objects such as pipes, radiators, ovens and
refrigerators.
There is an increased risk of receiving an electrical shock if your body is earthed.
c)
Do not expose the power tool to rain or other wet conditions.
Water entering a power
tool will increase the risk of electric shock.
d)
Do not abuse the mains lead. Never use the lead to carry/drag the tool or to jerk
the plug from a wall socket. Keep the lead away from heat, oil, sharp edges and
moving parts.
Damaged or tangled leads increase the risk of electric shock.
e)
Use an extension lead that is suitable for outdoor use when using the power tools
outdoors.
The use of an extension lead designed for outdoor use decreases the risk of
electric shocks.
f)
If the use of the power tool in a wet environment is unavoidable, a wall socket
equipped with a residual current device (RCD) should be used.
Use of an RCD
significantly reduces the risk of electric shock.
g)
The mains lead should be checked regularly. Never use the product if the mains
lead or plug is damaged.
If the mains lead is damaged in any way it must be replaced by
a qualified electrician.
Summary of Contents for 18-3578
Page 2: ...2...
