EN
G
LI
S
H
6
Instructions for use
Batteries
Warning
Make sure that the laser level is switched off before
inserting batteries.
1. Never mix old and new batteries. Never mix
rechargeable and non-rechargeable batteries.
2. Remove the battery cover (4) and insert 2 × AAA/
LR03 batteries. Refer to the markings in the battery
compartment to ensure correct polarity.
3. Refit the battery cover.
Using the laser level
When the laser level is switched on, the automatic self-levelling system compensates
for inclines up to 3º.
The laser lines will switch off and the levelling warning light (2) will shine red if the laser
level is inclined more than 3° in any direction.
When the levelling warning light shines green and the projected laser lines have stopped
moving, the laser level is horizontal and ready to be used.
x
x
1. The laser level can be mounted onto a tripod, placed on a firm flat surface, or held
against a stationary vertical surface for stability.
2. When the laser level is switched on using the power switch (3), a green cross line
laser beam will be projected.
3. Always switch the laser off using the power switch after you have finished levelling
or when moving to a different location.
